Fascia and soffit installation is a very important part of a roof. It helps to prevent rain from entering your home and also prevents mold and decay. You can either choose to have the work done by a professional, or you can do it yourself. There are some steps you need to follow to make sure the job is done right.
Before you start your roofing project, it is vital to consider the materials you will need. The most common material used to install fascias and soffits is wood. However, aluminum and composite materials are also available. These require less maintenance and are cheaper.
You will need to have scaffolding set up in order to install soffits and fascias. This is a cost that will typically be between PS1500 and PS2800 for a semi-detached house, and PS2,700 to PS5,000 for a terraced house. If you want to use scaffolding, it will be best to hire someone experienced in working on the roof. If you do it yourself, be sure to follow safety precautions.
You should always check for damage to the timber before you begin. If you see signs of rot or decay, it will need to be replaced before you can proceed with the installation. There are alternatives, such as marine plywood, which can be used to replace the timber.
A roof with good quality soffits and fascias will last for many years. It can also help increase the value of your home. The key is to install them correctly. You will need to follow the correct joints and ensure the fascia is caulked and sealed. If the fascias are not installed properly, you may notice water seeping into the interior of your house.
If you plan on replacing your soffit and fascia boards, it is recommended that you consult with a professional. They will be able to give you a more accurate estimate of the work needed and the time required. It is not always possible to know how long a soffit or fascia will last, so it is essential to keep them in good condition.
To install a soffit board, you should first determine the size of the section that you need to cover. It should be at least 10mm wide. If the board is wider than that, additional support pieces will need to be attached. The box end of the soffit will need to be cut to the right height. The return leg of the soffit should be hidden by the fascia board.
To install the soffit, you will need a hack saw and nails. The trim nails should have small heads. It is not advisable to hammer the nails into the timber batter. You can use low modulus silicone to fix the trim.
When you are replacing your soffit and fascia, it is a good idea to do it before the spring or summer. In the summer, the sun is very hot and it can damage the material. If you do not take this into consideration, you could wind up with a rotten soffit and fascia board.
Click here to learn more about white upvc flat soffit board internal external soffit fascia derby.