If you are struggling with the fogging of your double pane windows, there are several ways to solve the problem. However, if your window is rotting and needs replacement, you may be better off calling in a professional.
The first step is to identify the cause of your condensation. This is usually a broken seal. The seal is designed to prevent moisture from entering the cavity between the two pieces of glass. If your window has no air tight seals, water can enter the window and cause damage. If there is too much moisture, the frame can rot, and the seal can get damaged.
If the seal is still in good condition, you can try cleaning the inside of your window. Use warm water and white vinegar to clean the window. You should also use a dehumidifier to clear out the trapped moisture. If this is not possible, you can use a hairdryer or space heater to dry out the area. You can then point a fan on the area to increase airflow.
Another way to clear out moisture is to drill holes in the glass. If you have a small area between the panes, a rubbing alcohol can be used to remove dirt. If there is a lot of dirt build up, you can tuck a desiccate packet into the holes, then rinse. If the hole is not large enough, you will need to pump a special drying agent into it.
A more complicated and costly solution is to replace the entire window. If you have a warranty, your window manufacturer should be able to replace the unit for you. They can do this either by replacing the entire unit or by resealing it. Alternatively, you can purchase a new glass panel. If you do not have a warranty, you should still call your window manufacturer.
If the glass panel is already rotting, you can use a tool like a water snake or drain snake to remove the moisture from the window. You can even create a DIY device to thread through the holes. If you need to do this, make sure to wrap it in pantyhose to avoid a dripping mess.
You can also drill a hole on the top of your door. This will allow you to access your window without breaking the glass. Once you have access to the unit, you can remove the sash and clean the glass. If you have a big dent, you will probably need to have your paint restored.
To fix a double pane window, you will need to clean each piece of glass. If the glass is cracked, it will need to be repaired. You will also need to reseal each section of the unit. Using a window vacuum can help you with this. If your double pane window has too much moisture, a dehumidifier will help to remove the moisture. If your window is foggy, you can place a space heater near the windows to absorb the moisture.
Click here to learn more about fascia board derby.
